wiki:Software/Install/Normal

Version 6 (modified by smith@…, 8 years ago) (diff)

Added start information

Install Raptor in the Recommended Normal Setup

The recommended, normal, setup of Raptor involves the Raptor ICA being installed on each server you wish to monitor, and the Raptor Server components (the MUA and the Web interface) being installed together on a separate server.


1. Installing

1.1 Installing the Server Components

The first step is to install both the MUA and Web packages. Instructions are available for doing this on Linux or on Windows. Follow these instructions then come back here and continue to the next section.

1.2 Installing the ICA

The next step is to install the ICA package on each service you wish to monitor. Instructions are also available for doing this on Linux or on Windows. Follow these instructions then come back here and continue to the next section.


2. Configuring

2.1 Configuring the ICA and MUA to communicate

Now that you have the server components (MUA/Web) installed on one server, and the ICA on another, they must be configured to communicate with each other. To do this, follow these instructions - Configure the ICA and MUA to communicate.

2.2 Configuring the ICA

The ICA is now installed and configured to talk to an MUA, so the final step is to configure the ICA itself. To do this, follow these instructions - Configure the ICA?.


3. Start the ICA daemon/service

Now that the ICA is installed and configured, it is ready to start. This will usually involve the following:

  • On Linux (as root):
    service raptor-ica start
    
  • On Windows
    • Open the Services window and start the Raptor-ICA service.

4. Enjoy!

If you encounter any problems, check out the Raptor Support pages.